105TUTX: List: $195.00
1/4" Dr 5 Pc Stubby Universal Torx Set
Job: The stubby torx set is perfect for working in tight areas. The T30 is ideal for Honda airbag control module inside passenger compartment of dashboard.

BJP1HONDA: List: $89.10
Honda Ball Joint Adaptor Set

Job: The BJP1HONDA 2pc adaptor set is to be used with the BJP1 master ball joint set to service lower and upper ball joints on Honda's from 1997 to 2008.

FPS32E: List: $22.20
3/8" Dr Short #3 Phillips Socket Driver
Job: The FPS32E is perfect for high torque application on Honda Brake Drums and Rotors.

OFHON33: List: $27.75
Honda Oil Filter

Job: Prevents any unwanted mess as the OFHON33 fastens and seals onto the filler neck with Honda's that have an oil filler with threaded oil filler cap. For example, threaded oil fillers found on Honda Accord, Civic, Element, Fit and S2000.

S6194: List: $40.75
1/2" Sq Dr 4" long 12 Pt Head Bolt Socket 12mm
Job: This head bolt socket will work on Honda's with 12mm head bolts where the 4" length reaches past cam and rocker assembly to service head bolts. Thin profile socket and shank will reach through the acess hole and past overhead camshaft.

SGTT110: List: $100.45
10 Pc Soft Grip Terminal Release Tool Set
Job: Applications include the Honda powertrain control modules and open connector clips and side of clips.

SWR4: List: $85.75
Bent Handle/Flexhead Shielded Oxygen Sensor Wrench 22mm
Job: Depth of socket and wall diameter of socket is critical for the limited space inside the heat shield. Will remove oxygen and air/fuel sensors on 2006 and later Honda's.

YA6010A: List: $83.00
Honda Harmonic Dampener Pulley Holding Tool
Job: The YA6010A saves time during the removal and installation of the crank bolt on most Honda engines. The YA6010A prevents the pulley from rotating when removing/installing the pulley bolt.

YA6810: List: $211.90
Honda Bushing Tool, Front Lower Compliance Bushing
Job: Removal of the front lower control arm compliance bushing both 65mm and 74mm sizes found on many Honda's. The YA6810 will save over 1hour (30 minutes per side). Also, no press required and the YA6810 will remove and install.

YA9350B: List: $132.45
Fine Tooth Ratcheting Belt Tensioning Wrench Set
Job: Allows direct access to belt tensioners without having to remove engine accessories or frame components. Covers almost 90% of all vehicles equipped with spring loaded serpentine belt tensioners.