Organize your list for later reference.
Plan and prioritize for future purchases.
Email your wish list to friends & family.
Multimeter, Digital, Auto-Ranging
Description:EEDM504D Auto Ranging DMM includes:500mA, Ceramic UL Fuse (EEDM504B1)10 Amp Ceramic, UL Fuse (EEDM504B2)Test Lead Set with Alligator Clips (EEDM504B3)Rubber Boot (EEDM504C1)Soft Vinyl Pouch (EEDM504B4)Instruction Manual (ZEEDM504D)(1) 9 Volt Alkaline Battery InstalledOptional Accessories (Not Included)0-400 AC/DC Amp Clamp-on Accessory (EETA501B)0-1,000 AC/DC Amp Clamp-on Accessory (EETA502B)10mA to 60Amp Low Current Clamp (MT10100)30 Amp Adaptor (MT5030)0 - 500PSI Pressure Adaptor (MT5810)Boot Hook Hanger for Rubber Boot (EEDM503B1)RPM Adaptor (MTRMPGA)Hard Carrying Case (MT586BK1)Soft Carrying Case with shoulder strap (MT596AK1)K-Type Differential Temperature Adaptor (EEDM506C)Deluxe Test Lead and Adapter Set (MTTL700)General SpecificationsMax. Voltage between any Input and Ground: 1000VFuse Protection mA: 0.5Amp/600VACFuse Protection A: 10Amp/600VACDisplay Type: 4000 Count with 42 segment bargraphOperating Temperature: -0° to 40°C (32° to 104°F)Storage Temperature: -10° to 50°C (14° to 122°F)Relative Humidity: 0% to 80%Power Supply: 2 each 1.5 Volt "AA" BatteriesBattery Life: 200 hrs. TypicalSize (H x L x W): 2.4" x 3.8" x 8.0" (61mm x 97mm x 203mm)Weight: 24 oz. (680g) Features: LCD Display - 4000 count with 42 segment bar graph. REC (Record Mode) - Store minimum and maximum readings over a measurement period. RANGE - Manually select the appropriate range AC/DC - Manually select AC or DC measurement function. CONTINUITY BUZZER and DIODE TEST - Toggle between continuity buzzer or diode test on Ohm function. HIGH RESOLUTION DCmV RANGE - Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements. ACV (AC Volts) - Measure the voltage of ABS wheel sensors. DCV (DC Volts) - Measure the voltage of circuits and sensors. Hz/Duty (Duty Cycle) - Measure in percent the "ON" time of sensors or other devices. REL (Relative Mode) - Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements. HOLD - Lock the reading on the display for hard to read locations for future reference. OHMS/RESISTANCE - Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring. AC/DC Current Functions (Amps) - Measure the parasitic draw from the battery with ignition off. Hz (FREQUENCY) - Measure the frequency of sensors and signals. CAP (Capacitance) - Measure the capacitance of condensors or capacitors found in today's hybrid automobiles. TILT STAND - Is built into the instrument housing. SEPARATE FUSE/BATTERY COMPARTMENT - Is easily removed for battery/fuse replacement. Fuses are labeled with replacement number. 7 year Limited Warranty. Technical and Service Hot Line: 1-888-382-6522