|
 |
| Image shown
may not be actual product but represents product or set which includes product. |
|
|
 |
|
|
|
 | Register your diagnostics tool here. |
|
|
|
| |
| MicroVAT
Battery, Starting, and Charging System Tester |
| Drawing on the experience of a strong VAT tradition, Snap-on proudly presents
the MicroVAT handheld electrical system analyzer that performs automated
tests in under a minute and allows the technician to diagnose a battery
in under five seconds. |
| MicroVAT
takes advantage of new Impedance/Current test technology to detect the full
range of battery failure modes including bad cells, sulfation, internal
shorting, and other chemical and physical failures. Testing takes less than
five seconds and works on batteries discharged down to as low as one volt.
This saves you valuable time by reducing lengthy charge and re-test situations. |
| |
| EECS304B1B
MicroVAT Features:
|
- Automated
diagnostic tests, plus detailed test data for expert-level troubleshooting.
- Automated system test of battery, alternator and starter in under a
minute.
- Detailed test data: alternator ripple, internal resistance, starter
draw, state of charge, charging amps, and volts.
- Fan-cooled 50-amp load for accurate alternator test under loaded conditions.
- Tests discharged batteries down to one volt.
- Exclusive "IC" Test impedance/current
test technology.
- Diagnostic result: battery, alternator, starter.
- Two-position memory for test data storage.
- Easy one hand operation with easy to use button
and thumbwheel controls.
- Simple menus, prompts and button/thumbwheel controls.
- Internally powered -- four AA cells.
- Wireless printer option.
- Integrated high and low amp probe options.
|
| EECS304B1B
MicroVAT Highlights: |
Road
Test With the MicroVAT.
With portable power, MicroVAT goes where others can't go, on the road to
pinpoint the causes of starting and charging problems without having to
tow the vehicle or remove components for testing. MicroVAT's automated system
test produces clear, easy to read diagnostic results in less than a minute.
MicroVAT convinces the customer as well as the technician by putting a diagnostic
printout in hand for customer verification of diagnostic results and needed
repairs. |
 |
Fits
in the Hand, Yet Big Enough to Deliver the Load.
What sets MicroVAT apart is its diagnostic power. For example, MicroVAT
uses its exclusive fan cooled 50-amp load and integrated amp probe to test
the quantity and quality of alternator output with an alternator ripple
test. It's the road to a complete diagnosis. (Many late model computer controlled
charging systems virtually shut down under no load conditions.) |
|
See Results With MicroVAT.
MicroVAT can perform a sequential system test that includes the battery,
alternator and starter in under a minute; most individual tests take just
a few seconds. MicroVAT is easy to use with step-by-step prompts displayed
on MicroVAT's LCD and one hand, one button operation. Along with the diagnosis,
MicroVAT delivers detailed test data that you can view on the MicroVAT's
LCD, print to wireless printer, or save in memory for later review and analysis.
What's more, data can also be downloaded to a PC and then viewed with Snap-Link.
Data is always available in a convenient form that guides technicians and
shows customers diagnostic results. |
| |
| MicroVAT
Diagnostic Tests:
|
| Starting
Test Data. |
- Average
Cranking Current*
- Maximum
Cranking Current*
- Preset
Voltage
|
- Preset
Load Voltage
- Avg.
Cranking Voltage
- Minimum
Cranking Voltage
|
|
|
|
| Battery
Test Data. |
- Diagnosis
- Actual CCA
- % of Capacity
|
- Open Circuit Voltage
- Impedance
|
|
|
|
| Alternator
Test Data. |
- Diagnosis
- Failure
Mode
- Charging
at Idle
- Charging
Volts Under Load
|
- Average Current at Idle*
- Peak Current*
- Peak to Peak Ripple at Idle
- Peak to Peak Ripple Under Load
|
|
|
|
| |
| With
optional integrated amps probe. |
Diagnostics
Important Information About Safety for Users and Bystanders
